How To Setup Network Camera

August 31, 2020.

As easy as a plug and play PoE IP security camera arrangement tin can be there are other ways to set up a security camera arrangement on a network. However, someone might want to set up only 1 camera on their network, or have a stubborn camera that is causing issues. This article aims to aid those who are having issues with setting up a system, or want to larn more about configuring a single IP camera on a network.

We've broken down the process in to piece of cake to follow steps:

1. Who is this commodity for?
2. Requirements to follow this article
3. If you lot don't like to read, you can lookout the video hither
4. Determining the network scheme
5. Configure the camera for the network
6. Further Reading

Who is this article for?

Every bit nosotros mentioned in the introduction this article is really for two types of people who are trying to exercise either of the post-obit:

1. People who bought an IP photographic camera for viewing in a web browser, for standalone recording, or for streaming to the web
2. People who bought an IP camera system and need to troubleshoot or configure IP cameras to their network scheme

Requirements to follow this article

1. IP Camera from CCTV Camera World - Our IP cameras are shipped with a preconfigured IP address, username and password. This information is plant on a label that is attached to the top or side of the IP photographic camera'due south box. Do not throw away the box or remove the label.
2. Provide power to the camera - A camera tin can be powered using whatever 1 of iii ways:
1. PoE Injector - Utilize two cables - One to provide power and data, the other to connect to a network
2. PoE Switch - Connect and power multiple cameras - Use the uplink port and Ethernet cables to connect cameras to a network router
3. 12VDC Ability Adapter - Connect the adapter to the wall and connect the power connector to the photographic camera - Use an Ethernet cable to connect to a network router

3. An Ethernet cablevision - CAT5e or CAT6 are what nosotros recommend - the cablevision is used to connect the IP camera to a network.
4. A Windows Calculator to follow our guide and view the camera from a web browser

If you don't like reading picket the video below.

Determining the scheme and configuration of the network

The default IP address ready on our cameras from the factory is 192.168.1.109. If the network a person is trying to connect a photographic camera to is not 192.168.1.thirty compatible then the camera cannot communicate on that network. This article does not intend to teach someone virtually what an IP address is, or how to do advanced networking; information technology is a step by step guide to setting a camera up on a network.

Use a Command Prompt with the Ipconfig command

The easiest way to find out the IP address scheme of a network is by using the Command Prompt program. Control Prompt is included in all Windows PCs. There are many dissimilar ways to access the Command Prompt program and find out the IP accost scheme merely the easiest method for novice users is listed beneath.

1. Click the Windows icon or windows button on the keyboard
2. Type "Command Prompt" or "cmd" into the search bar
3. Click the program on the list
4. Clicking the plan should open a panel with a blinking cursor
5. Type "ipconfig" and press enter into the software
6. The network scheme volition be printed out within of the console
7. Write down or notation the IP address scheme - if it is 192.168.1.xxx then a user can easily admission the IP camera using the 192.168.1.109 address already and should motility onto our other guides

Here is an example output of the ipconfig command from a computer in our function network.

Login to the camera and configure it for the network

This is the about hard section for anyone who is non an It person or has very good computer skills. Below is a step-wise overview of what to do but to become a better idea check out the video in the article that covers the process from the first to stop.

1. Modify the network settings on the PC to a 192.168.1.xxx scheme

The first stride to the process is to modify the PC network settings to a 192.168.i.xxx network address temporarily. This stride allows a user to access the IP photographic camera to change information technology's IP address to a compatible IP accost for their main network. The main network is the network scheme that was found by using the Command Prompt.

1a) Right click the network connexion icon for your Windows 10 PC

If the computer is wired into the network the icon should look like a monitor with an Ethernet cable. If the computer is a laptop or tablet the icon volition look like WiFi bars.

1b) Select the "Open Network & Internet settings" selection

1c) Await for the "Change your network settings" department. Click "Change adapter options"

1d) A Control Panel window should appear with the computer's network connections

1e) Correct click the Ethernet or WiFi connectedness for the network that the IP camera is continued to and click "Properties"

1f) Click to highlight the item "Internet Protocol Version 4 (TCP/IPv4) and click the Properties option beneath the item list

1g) Inside of the Internet Protocol Version 4 settings select the "Utilise the post-obit IP address:" button

1h) Set the computer'due south IP accost to a compatible IP address with the network scheme that was written down. For example if the network is 192.168.50.xxx set the calculator to 192.168.2.50. The concluding number (aka octet) must exist between 2 and 254 but it does not matter what someone chooses. We use fifty because information technology is easy to recall.

Too fix the subnet mask to 255.255.255.0, it may autofill the subnet mask.

A Gateway is non necessary just tin can exist useful if Windows gets dislocated. Ready it to 192.168.1.1.

1i) Click OK. So click Close to go out the connection backdrop.

The computer is now set up to communicate on the 192.168.one.1 network and will be able to access the camera.

2. Login to the camera and configure information technology for the main network scheme

Now that the computer is prepare upwardly to communicate with the camera on the 192.168.i.1 network the user must access the camera using Internet Explorer. Cyberspace Explorer will be the easiest fashion to access a photographic camera without running into plugin errors or other compatibility problems with newer browsers. Some newer cameras exercise back up live viewing from Chrome, Firefox, and Edge merely Cyberspace Explorer should be used for configuration purposes.

2a. Open up Internet Explorer by using the Windows 10 PC Commencement menu. Type IE or Net Explorer into the Windows search bar if yous can't find it.

2b. Type the IP address of the camera into the address bar of Net Explorer. The IP address should be 192.168.1.109 if information technology is the factory default.

2c. Press enter to direct the browser to the cameras web interface

second. Login to the camera using the default username and password. This data is too found on the characterization for the camera's box.

2e. Navigate to the IP/TCP Network settings by clicking the "Setting" tab on the pinnacle and using the navigation bar on the left manus side. Click Network, and then TCP/IP if you lot're unsure how to use the interface.

second. Gear up the photographic camera to an IP accost that is open on the main network. This ways that if the main network is 192.168.2.thirty and so the accost will need to match that scheme. For example you can set the camera to 192.168.2.109. For Comcast customers this may oftentimes exist a 10.0.0.xxx address or an example 10.0.0.109.

2e. Set the Subnet mask to 255.255.255.0

2f. Set the Gateway to the main network routers IP address. This is usually the .i IP address. For example 192.168.2.i or ten.1.1.1. However it can be different depending on the manufacturer of the router.

2f. Click "Save". The camera should say if the changes were saved successfully, or if in that location is any error with the settings.

3. Change the computer network settings dorsum to default

Echo the same process to get back to the cyberspace settings on the figurer. If you're unsure feel complimentary to scroll back to section one and repeat the steps. Only this time change the IP address settings dorsum to "Automatically Obtain an IP Accost".

Confirm that the computer now has internet or network access on the main network. Try to access the camera using Internet Explorer and the address that was just set on the camera.

If the computer can now access the IP camera on the main network then you can motility onto using the photographic camera for its intended purpose. Review the links in the section below to check out our great articles

To add the camera to an NVR over the network use the Photographic camera Registration screen on the NVR. Search the network for the camera and click the "Add" button. Or add a manual entry using the username, countersign and IP address that was set on the camera.

Note: If the computer is a part of a corporate network you lot may desire to consult with your It department to what IP accost your figurer should be set back to if it was not noted before changing the setting.

Further Reading

Security Photographic camera Systems

NVRs - Network Video Recorders

PC/MAC Software Guide

Security Camera Ownership Guide

How to connect a security camera to the Internet

Using Security Cameras as Standalone

How to setup an IP Security Camera Organisation on a Network

Recording Security Cameras with SD Cards

Smartphone App for Remote Viewing Security Camera Systems

Source: https://www.cctvcameraworld.com/configure-ip-camera-on-network/

Posted by: keetontheut1965.blogspot.com

Share this post